0,35 18,25 

Wire rope clips EN 13411-5-1

for the production of temporary rope end connections



Wire rope clips EN 13411-5-1

for the production of temporary rope end connections


Clamping bracket: strength class 6.8

Clamping jaw: cast

Collar nut: strength class 6


Clamping jaw: galvanized

Bracket and nut: yellow chromated

Safety requirements: tensile test and tensile swell test according to DIN 13411-5

All clips are marked with the nominal size and the manufacturer’s identification

korrekte Montage von Drahtseilklemmen

The specified tightening torques apply to greased threads and nut contact surfaces. Please continue to observe the rules and guidelines relevant to your application. DIN 18800-1 “Steel structures, dimensioning and construction” requires e.g. a number of rope clips increased by 1 piece.

Additional information

Nom. size

, , , , , , , , , , , , ,


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Regular inspection according to DGUV

No, the clamp as a loose element should not be tested.

Slings made using rope clamps are only permitted for one-time use.

If wire ropes with rope clamps are installed, they must be checked by an expert at least once a year.

In this case it is a visual and functional check.

Basically possible if the expert is available and the entrepreneur has made the appointment as expert.

The inspection must be recorded in writing. The test report must be presented to the authorities on request.

This product is also subject to annual inspection according to DGUV.

You too can benefit from our inspection service!

I like to check for you too !

similar products