Anschlagmittel, LAM, Drahtseile, LaSi, Baugeräte, Prüfservice + mehr

lifting

sling ropes

useful information

about sling ropes

Sling ropes are made from steel wire ropes that are fitted with eyes or suitable fittings such as hooks or shackles.

The ropes are manufactured in accordance with DIN EN 13414 (formerly DIN 3088). The applicable European regulations differentiate between sling ropes according to the type of insert and the end connection. Thereafter there are 8 variants with different load capacities:

Sling ropes in pressed design with aluminum or steel pressing with fiber core FC or steel core IWRC.

For cable laid ropes in pressed or spliced design, ropes with a steel core are used, which are stranded around a central fiber core.

Endlessly laid grummets are made from ropes with fiber core FC or steel core IWRC.

Regular inspection according to DGUV

Yes. According to DGUV 100-500, an examination by an expert is required at least once a year.

Yes. Chain slings must be checked for cracks every 3 years.

Basically possible if the expert is available and the entrepreneur has made the appointment as expert.

The inspection must be recorded in writing. The test report must be presented to the authorities on request.

Please observe the original operating instructions

This product is also subject to annual inspection according to DGUV.

You too can benefit from our inspection service!

I like to check for you too !

sling ropes

bitte weitersagen

Like this:

%d bloggers like this: